Netgear GSM7228PS User Manual download pdf (Page 251)

100

101

Routing Commands

251

ProSafe Managed Switch

no ip route default

This command deletes all configured default routes. If the optional <nexthopip> parameter

is designated, the specific next hop is deleted from the configured default route and if the

optional preference value is designated, the preference of the configured default route is

reset to its default.

Format no ip route default [{<nexthopip> | <preference>}]

Mode

ip route distance

This command sets the default distance (preference) for static routes. Lower route distance

values are preferred when determining the best route. The ip route and ip route

default commands allow you to optionally set the distance (preference) of an individual

static route. The default distance is used when no distance is specified in these commands.

Changing the default distance does not update the distance of existing static routes, even if

they were assigned the original default distance. The new default distance will only be

applied to static routes created after invoking the ip route distance command.

Default

Format ip route distance <1-255>

Mode

no ip route distance

This command sets the default static route preference value in the router. Lower route

preference values are preferred when determining the best route.

Format no ip route distance

Mode

ip netdirbcast

This command enables the forwarding of network-directed broadcasts. When enabled,

network directed broadcasts are forwarded. When disabled they are dropped.

Default

Format ip netdirbcast

Mode

Global Config

disabled

Interface Config

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 251

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS