Netgear WNDAP360 User Manual download pdf (Page 99)

Advanced Configuration

ProSafe Dual Band Wireless-N Access Point WNDAP360

 To configure the wireless access point to repeat the wireless signal:

1. Select the 802.11b//jointfilesconvert/44179/bg/ng or 802.11a/na tab.

2. Conf

igure the security profiles on the wireless access point (AP2 in the previous figure):

a. Select Co

nfiguration > Wireless Bridge. The Bridging screen displays (see the

following figure).

b. Select

the Enable Wireless Bridging check box. The Local MAC Address field is a

nonconfigurable field that shows the MAC address of the wireless access point.

c. Select

the Wireless Point-to-Multi-Point Bridge radio button. The screen adjusts.

Figure 60.

d. The profile table shows four security profiles. Choose a security profile to edit by

selecting the corresponding radio button to the left of the profile.

e. Click Edit to con

figure the selected security profile settings. The Edit Security Profile

screen displays for the selected security profile. (The following figure contains some

examples.)

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 99