Netgear WNDAP360 User Manual download pdf (Page 13)

Introduction

ProSafe Dual Band Wireless-N Access Point WNDAP360

The rear panel functions of the ProSafe Dual Band Wireless-N Access Point WNDAP360 are

described in the following list:

1. Reverse

SMA connector for an optional 2.4-GHz antenna.

2. Factory def

ault Reset button. Using a sharp object, press and hold this button for about

5 seconds to reset the wireless access point to factory defaults settings. All configuration

ttings are lost, and the default password is restored. For more information, see Restore

the Wireless Access Point to the Factory Default Settings on p

age 66.

3. Console

port for connecting to an optional console terminal. The port has an RJ-45

connector and supports the following settings: 9600 K default baud rate, (8) data bits, no (N)

parity bit, and one (1) stop bit.

4. 10/100

/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink (Auto MDI-X) with

IEEE 802.3af Power over Ethernet (PoE) support for connection to a switch or router.

5. Cable

security lock receptacle for an optional lock.

6. Power socket for a 12 VDC,

1A power adapter.

7. Reverse

SMA connector for an optional 2.4-GHz antenna.

Bottom Panel with Product Label

The product label on the bottom of the wireless access point’s enclosure displays factory

default settings, regulatory compliance, and other information:

Figure 3.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 13