Netgear WNDAP360 User Manual Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 137
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
Management
66
ProSafe Dual Band Wireless-N Access Point WNDAP360
Restore the Wireless Access Point to the Factory Default
Settings
You can restore the wireless access point to the factory default settings by two methods that
are described in the following sections:
Use the Web Management Interface to Restore Factory Default Settings
Use the Reset Button to Restore Factory Default Settings
Note: After you have restored the factory default settings on the wireless
access point:
* All custo
m configurations will be lost.
* The login
password will be password.
* The de
fault LAN IP address will be 192.168.0.100.
* The DHCP
client will be disabled.
* The Access Point Name
field will be reset to the name printed on
the label on the bottom of the unit.
Use the Web Management Interface to Restore Factory Default Settings
IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!
To restore the factory default settings using the web management interface:
1. Select Ma
intenance > Reset > Restore Defaults. The Restore Defaults screen
displays:
Figure 38.
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 136 137

Comments to this Manuals

No comments