Netgear WNDAP360 User Manual download pdf (Page 24)

Installation and Basic Configuration

ProSafe Dual Band Wireless-N Access Point WNDAP360

Figure 12.

2. Specify the wireless mode in the 2.4-GHz band by selecting one of the following radio

buttons:

• 11

b. Both 802.11n- and 802.11g-compliant devices can connect to the access point

because they are backward compatible.

•

11/jointfilesconvert/44179/bg. 802.11n-compliant devices can connect to the access point because they are

backward compatible.

• 11

ng. This is the default setting. 802.11b-compliant devices cannot connect to the

access point. If you keep the default setting, go to step 5.

When you change the wireless mode, the Turn Radio On check box is automatically

cleared, a

nd all fields, button, and drop-down list onscreen are masked out.

3. T

urn on the radio by selecting the Turn Radio On check box. A popup screen displays.

Note: Under normal conditions you want the radio to be turned on. Turning off

the ra

dio disables access through the wireless access point, which can be

helpful for configuration, network tuning, or troubleshooting activities.

4. Click OK to confirm t

he change of wireless mode. The change does not take effect until you

click the Apply button after you have completed the wireless configuration.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 24