Netgear WNDAP360 User Manual download pdf (Page 16)

Installation and Basic Configuration

ProSafe Dual Band Wireless-N Access Point WNDAP360

In order for this to work correctly, verify that you have met all of the system requirements,

shown in System Requirements on p

age 7.

Install and configure your wireless access point in

the order of the following sections:

1. Connect the Wireless Access Point to Computer

2. Log In to the Wireless Access Point

3. Configure Basic General System Settings

and Time Settings

4. Configure IP Settings and Optional DHCP Server Settings

5. Configure Basic Wireless Settings

Connect the Wireless Access Point to Computer

Tip: Before you place the wireless access point in an elevated position that is

difficult to reach, first set up and test the wireless access point to verify

wireless network connectivity.

 To set up the wireless access point:

1. Unp

ack the box and verify the contents.

2. Prep

are a computer with an Ethernet adapter. If this computer is already part of your

network, record its TCP/IP configuration settings. Configure the computer with a static IP

address of 192.168.0.210 and 255.255.255.0 as the subnet mask.

3. Connect an Ethern

et cable from the wireless access point to the computer (point A in the

following figure).

4. Securely insert

the other end of the cable into the wireless access point’s Ethernet port

(point B in the following figure).

Figure 4.

Ethernet cable

Ethernet port

WNDAP360

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 16