Netgear WNDAP360 User Manual download pdf (Page 83)

Advanced Configuration

ProSafe Dual Band Wireless-N Access Point WNDAP360

3. Click Apply to save your settings.

Hotspot Settings

If the wireless access point functions as a public access point and you want it to capture and

redirect all HTTP requests (over TCP, port 80), set up a hotspot server to redirect the

requests to the specified URL and manage the clients. For example, you can redirect HTTP

requests to a Web server for authentication, timing control, or advertising. A hotel might want

all wireless connections to go to its server to start a billing transaction.

Note: The redirection occurs only the first time that a wireless client opens

a Web browser.

 To set up a hotspot server:

1. Select Con

figuration > System > Advanced > Hotspot. The Hotspot screen displays:

Figure 50.

2. To enable HTTP redirection, select the Enable radio button. By default, the Disable radio

button is selected.

3. In the Re

direct URL field, enter the URL of the Web server to which you wish to redirect

HTTP requests.

4. Click App

ly to save your settings. All HTTP requests are now redirected to the specified

URL.

Management VLAN Specify an ID for the VLAN from which the wireless access point can be

managed. The default VLAN ID is 1.

Note: If you configure the VLAN ID as 0 (zero), the wireless access point can be

man

aged over any VLAN, and frames that belong to the management VLAN are

not tagged with an 802.1Q header when sent over the trunk.

Table 23. STP and VLAN Settings (Continued)

Field Description

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 83