Netgear WNDAP360 User Manual download pdf (Page 63)

Management

ProSafe Dual Band Wireless-N Access Point WNDAP360

Figure 34.

5. Click Browse and locate the image (.zip) upgrade file.

6. Click App

ly to initiate the upgrade process.

During the upgrade process, the wireless access point auto

matically restarts. The

upgrade process typically takes several minutes. When the Test LED turns off, wait a few

more seconds before doing anything with the wireless access point.

7. V

erify that the new software file has been installed by selecting Monitoring > System. The

System screen displays (see Figure 42 on p

age 70). The firmware version is shown in the

Access Point Information section of the screen.

TFTP Server Upgrade Procedure

To use this method, you need to have a TFTP server set up.

 To use a TFTP server to upgrade the wireless access point firmware:

1. Download th

e new software file from the NETGEAR website and save it to your hard

disk.

2. Place the sof

tware file in your TFTP server location. (You do not need to unzip the file.)

3. If available,

read the release notes before upgrading the software.

4. Select Main

tenance > Upgrade > Firmware Upgrade TFTP. The Firmware Upgrade TFTP

screen displays:

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 63