Netgear WNDAP360 User Manual download pdf (Page 59)

Management

ProSafe Dual Band Wireless-N Access Point WNDAP360

SNMP Management

 To set up an SNMP management interface:

1. Select Mainte

nance > Remote Management > SNMP. The SNMP screen displays:

Figure 31.

2. Specify the settings as explained in the following table:

3. Click App

ly to save your settings.

Table 16. SNMP Settings

Field Description

SNMP Select the Enable radio button to allow the SNMP network management

software, such as HP OpenView, to manage the wireless access point

through SNMPv1/v2 protocol. By default, the Disable radio button is

selected.

Read-Only Community Name Enter the community string to allow the

SNMP manager to read the

wireless access point’s Management Information Base (MIB) objects. The

default is public.

Read-Write Community Name Enter the community string to allow the SNMP manager to read and write

e wireless access point’s MIB objects. The default is private.

Trap Community Name The community string to allow the SNMP manag

er to send traps. The

default is trap.

IP Address to Receive Traps The IP address of the SNMP manager to

receive traps sent from the

wireless access point.

Trap Port The port number of the SNMP manager

to receive traps sent from the

wireless access point. The default is 162.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 59