Netgear WNDAP360 User Manual download pdf (Page 27)

Installation and Basic Configuration

ProSafe Dual Band Wireless-N Access Point WNDAP360

Configure 802.11a/na Wireless Settings

 To configure the 802.11a/na wireless settings:

1. Select Con

figuration > Wireless > Basic > Wireless Settings. The basic Wireless

Settings screen displays. (The following figure shows the 802.11na settings.)

Figure 13.

2. Specify the wireless mode in the 5-GHz band by selecting one of the following radio buttons:

• 11

a. 802.11n-compliant devices can connect to the access point because they are

backward compatible.

• 1

1na. This is the default setting. If you keep the default setting, go to step 5.

When you change the wireless mode, the Turn Radio On check box is automatically

cle

ared, and all fields, button, and drop-down list onscreen are masked out.

3. T

urn on the radio by selecting the Turn Radio On check box. A popup screen displays.

Note: Under normal conditions you want the radio to be turned on. Turning off

he radio disables access through the wireless access point, which can be

helpful for configuration, network tuning, or troubleshooting activities.

4. Click OK

to confirm the change of wireless mode. The change does not take effect until you

click the Apply button after you have completed the wireless configuration.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 27