Netgear WNDAP360 User Manual download pdf (Page 60)

Management

ProSafe Dual Band Wireless-N Access Point WNDAP360

Secure Shell and Telnet Management

 To configure remote console features:

1. Select Ma

intenance > Remote Management > Remote Console. The Remote

Console screen displays:

Figure 32.

2. Enable or disable the remote console features:

• Secu

re Shell (SSH). To enable this feature, select the Enable radio button, which is

the default setting. Select the Disable button to disable the feature.

• T

elnet. To enable this feature, select the Enable radio button. Select the Disable

button to disable the feature, which is the default setting.

3. Click Apply to save

your settings.

 To manage the wireless access point over a Telnet connection:

1. Connect an Ethern

et cable to the console port of the wireless access point.

2. Connect th

e other end of the cable to a VT100/ANSI terminal or a workstation.

If you attach a PC, Apple Macintosh, or UNIX workstation, start a secure

terminal-emu

lation program, and configure the terminal-emulation program to use the

following settings:

• Baud

rate: 9600 bps

• Dat

a bits: 8

• Parity: n

one

• S

top bit: 1

• Flow con

trol: none

3. S

tart a secure Telnet session from the terminal or workstation to the wireless access point. A

screen similar to the following should display:

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 60