Netgear WNDAP360 User Manual download pdf (Page 72)

Management

ProSafe Dual Band Wireless-N Access Point WNDAP360

Monitor Wireless Stations

The Wireless Stations screen contains the Available Wireless Stations table. This table shows

all IP devices that are associated with the wireless access point in the wireless network that

is defined by the wireless network name (SSID). The table heading indicates the wireless

mode (802.11b, 802.11/jointfilesconvert/44179/bg, or 802.11ng and 802.11a or 802.11na).

Note: A wireless network can include multiple wireless access points, all

using the same network name (SSID). This extends the reach of the

wireless network and allows users to roam from one wireless access

point to another, providing seamless network connectivity. Under

these circumstances, be aware that the Available Wireless Stations

table includes only the stations associated with this wireless access

point.

 To view the attached wireless stations, and to view details for a wireless station:

1. Select Mon

itoring > Wireless Stations. The Wireless Stations screen displays:

Current Wireless Settings for 802.11n/a

Access Point Mode The operating mode of the wireless access point. One of the following modes is

indicated:

• Access Point

• Point-to-Point Bridge

• Point-to-Point Bridge with Access Point

• Multi-Point Bridge with/without client association

For information about how to change the mode, see Configure Wireless Bridging on

page 89.

Channel / Frequency The channel the wireless port is using. For information about how to change the

cha

nnel and frequency, see Configure 802.11a/na Wireless Settings on page 27.

Rogue AP Detection Enabled indicates that rogue AP detection is enabled; Disabled indicates that it is not.

Table 18. System Screen Fields (Continued)

Field Description

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 136 137

No comments

Netgear WNDAP360 User Manual Page 72