Netgear WN370 Installation Guide download pdf

Installation Guide

ProSAFE® Wall Mount Access Point WN370

Package Contents

Unpack the box and verify the contents:

• ProSAFE® Wall Mount Access Point WN370

• Mounting bracket with four mounting screws

• Warranty card

• Software license agreement

• Regulatory flyer

• Installation Guide

Installation Requirements

You must have the following items to successfully install your access point:

• A 6mm Phillips screwdriver

• A T8 screwdriver

• A computer running Windows XP or Windows 7

• A Standard EU or US wall outlet junction box with an ethernet cable routed

through the wall from your LAN to the junction box

• An IEEE 802.3af/at compliant PoE switch or IEEE 802.3af/at compliant PoE

injector

Mount the Access Point

The access point requires an electrical outlet junction box mounted in a wall.

To mount the access point to the wall:

1. Remove the faceplate from the outlet junction box.

2. Run the Ethernet cable through the junction box with enough slack to reach

the access point.

3. Run the Ethernet cables through the mounting bracket.

4. Align the mounting bracket with the holes on the junction box.

5. Attach the mounting bracket to the junction box using the included Phillips

head screws.

6. Connect the Ethernet cable providing PoE and network connectivity to the PoE

port on the back of the access point.

7. (Optional) Connect the Ethernet cable providing pass through support to the

pass through port on the back of the access point.

8. Mount the access point to the mounting bracket using the included T8

screws.

Set Up the Access Point

The WN370 access point can only be deployed in a network managed by a

ProSAFE WC7600 wireless controller. If you have a DHCP server in your network,

option 43 must be enabled pointing towards the IP address of the WC7600.

To discover and configure the access point using the WC7600 wireless

controller:

1. Access the wireless controller at the network IP address that you configured.

2. Select Access Point > Discovery > Discovery Wizard.

3. Follow the steps onscreen to discover the access point and review the discovery

results.

1 2

Summary of Contents

Page 1 - Set Up the Access Point

Installation GuideProSAFE® Wall Mount Access Point WN370Package ContentsUnpack the box and verify the contents:• ProSAFE® Wall Mount Access Point WN37

Page 2 - Troubleshooting Tips

January 2014NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiarie

Comments to this Manuals

No comments

Netgear WN370 Installation Guide

Browse online or download Installation Guide for WLAN access points Netgear WN370. Netgear WN370 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for WLAN access points Netgear WN370