Netgear Switch M4100 User Manual download pdf (Page 66)

100

101

66 | Chapter 4. Port Routing

ProSafe M4100 and M7100 Managed Switches

The Route Configuration screen displays.

2. In the Route Type list, select DefaultRoute.

3. In the Next Hop IP

Address field, enter one of the routing interface’s IP addresses.

• The Network Address and Subnet Mask fields will not accept input as they are not

needed.

• The Preference field is optional.

A value of 1 (highest) will be assigned by default if

not specified.

4. Click the Add button on the bottom of the screen.

This creates the default route entry in the routing table.

Add a Static Route

When the switch performs IP routing, it forwards the packet to the default route for a

destination that is not in the same subnet as the source address. However, you can set a

path (static route) that is different than the default route if you prefer. The following procedure

shows how to add a static route to the switch routing table.

CLI: Add a Static Route

The following commands assume that the switch already has a defined a routing interface

with a network address of 10.10.10.0, and is configured so that all packets destined for

network 10.10.100.0 take the path of routing port.

(FSM7328S) #show ip route

Total Number of Routes............................1

Network Subnet Next Hop Next Hop

AddressMaskProtocolIntfIP Address

--------------- --------------- --------------- --------------- ---------------

10.10.10.0 255.255.255.0 Local 1/0/3 10.10.10.1

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 66

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100

Související produkty a manuály pro Mobilní telefony Boost ZTE Warp