Netgear Switch M4100 User Manual Page 274

  • Download
  • Add to my manuals
  • Print
  • Page
    / 559
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 273
274 | Chapter 15. Security Management
ProSafe M4100 and M7100 Managed Switches
In following example, PC 1 and PC 2 can access the Internet as usual, but PC 1 cannot see
the traffic that is generated by PC 2, that is, no traffic is forwarded between PC 1 and PC 2.
Internet
PC 1
PC 2
Layer 2 switch
10.100.5.34
192.168.1.
192.168.1.
192.168.1.252 192.168.1.252
Figure 28. Protected ports
CLI: Configure a Protected Port to Isolate Ports on the Switch
1. Create one VLAN 192 including PC 1 and PC 2.
(Netgear Switch) #vlan database
(Netgear Switch) #vlan 192
(Netgear Switch) #vlan routing 192
(Netgear Switch) #exit
(Netgear Switch) #configure
(Netgear Switch) (Config)#interface 1/0/23
(Netgear Switch) (Interface 1/0/23)#vlan pvid 192
(Netgear Switch) (Interface 1/0/23)#vlan participation include 192
(Netgear Switch) (Interface 1/0/23)#exit
(Netgear Switch) (Config)#interface 1/0/24
(Netgear Switch) (Interface 1/0/24)#vlan pvid 192
(Netgear Switch) (Interface 1/0/24)#vlan participation include 192
(Netgear Switch) (Interface 1/0/24)#exit
(Netgear Switch) (Interface-vlan 192)#interface vlan 192
(Netgear Switch) (Interface-vlan 192)#routing
(Netgear Switch) (Interface-vlan 192)#ip address 192.168.1.254 255.255.255.0
(Netgear Switch) (Interface-vlan 192)#exit
Page view 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 558 559

Comments to this Manuals

No comments