Netgear Switch M4100 User Manual download pdf (Page 237)

100

101

Chapter 12. DiffServ | 237

ProSafe M4100 and M7100 Managed Switches

Color Conform Policy

This example shows how to create a policy to police the traffic to a committed rate. The

packets with IP precedence value of 7 are colored green to ensure that these packets are the

last to be dropped when there is congestion. The example is shown as CLI commands and

as a Web interface procedure.

CLI: Configure a Color Conform Policy

1. Create a VLAN 5 and configure ports 1/0/13 and 1/0/25 as its members.

(Netgear Switch) #vlan database

(Netgear Switch) (Vlan)#vlan 5

(Netgear Switch) (Vlan)#exit

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/13

(Netgear Switch) (Interface 1/0/13)#vlan participation include 5

(Netgear Switch) (Interface 1/0/13)#vlan tagging 5

(Netgear Switch) (Interface 1/0/13)#exit

(Netgear Switch) (Config)#interface 1/0/25

(Netgear Switch) (Interface 1/0/25)#vlan participation include 5

(Netgear Switch) (Interface 1/0/25)#vlan tagging 5

(Netgear Switch) (Interface 1/0/25)#exit

2. Create classes class_vlan and class_color.

Note: DiffServ service is enabled by default.

(Netgear Switch) (Config)#class-map match-all class_vlan

(Netgear Switch) (Config-classmap)#match vlan 5

(Netgear Switch) (Config-classmap)#exit

(Netgear Switch) (Config)#class-map match-all class_color

(Netgear Switch) (Config-classmap)#match ip precedence 7

(Netgear Switch) (Config-classmap)#exit

3. Create a policy to police the traffic to a rate of 1000 kbps with an allowed burst size of

64 KB. Furthermore, the packets with IP precedence value of 7 will be colored green. That

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 237

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100