Netgear Switch M4100 User Manual Page 110

  • Download
  • Add to my manuals
  • Print
  • Page
    / 559
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 109
110 | Chapter 7. OSPF
ProSafe M4100 and M7100 Managed Switches
In the Subnet Mask field, enter 255.255.255.0.
In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
4. Specify the router ID, and enable OSPF for the switch.
a. Select Routing > OSPF > Basic > OSPF Configuration.
A screen similar to the following displays.
b. Under OSPF Configuration, in the Router ID field, enter 2.2.2.2.
c. Click Apply to save the settings.
5. Enable OSPF on port 2/0/1
1.
a. Select Routing > OSPF >
Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/11 check box.
Now 2/0/11 appears in the Interface field at the top.
In the OSPF Area
ID field, enter 0.0.0.0.
In the OSPF Admin Mode field, select Enable.
c. Click Apply to save the settings.
6. Enable OSPF on port 2/0/19.
a. Select Routing > OSPF >
Advanced > Interface Configuration.
Page view 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 558 559

Comments to this Manuals

No comments