Netgear Switch M4100 User Manual download pdf (Page 55)

100

101

Chapter 3. LAG s | 55

ProSafe M4100 and M7100 Managed Switches

• Better use of physical resources. Traffic can be load-balanced across the physical links.

• Increased bandwidth.

The aggregated physical links deliver higher bandwidth than each

individual link.

• Incremental increase in bandwidth.

A physical upgrade could produce a tenfold increase

in bandwidth; LAG produces a two- or fivefold increase, useful if only a small increase is

needed.

Create Two LAGs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create Two LAGs

(Netgear Switch) #config

(Netgear Switch) (Config)#port-channel name lag 1 lag_10

(Netgear Switch) (Config)#port-channel name lag 1 lag_20

(Netgear Switch) (Config)#exit

Use the show port-channel all command to show the logical interface IDs you will use to

identify the LAGs in subsequent commands. Assume that lag_10 is assigned ID 1/1, and

lag_20 is assigned ID 1/2.

(Console) #show port-channel all

Port- Link

Log. Channel Adm. Trap STP Mbr Port Port

Intf Name Link Mode Mode Mode Type Ports Speed Active

------ --------------- ------ ---- ---- ------ ------- ------ --------- ------

1/1 lag_10 Down En. En. Dis. Dynamic

1/2 lag_20 Down En. En. Dis. Dynamic

Web Interface: Create Two LAGs

1. Create LAG lag_10.

a. Select Switching > LAG > LAG Configuration.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 55

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100