Netgear Switch M4100 User Manual download pdf (Page 17)

100

101

Chapter 2. VLANs | 17

ProSafe M4100 and M7100 Managed Switches

The Private Edge VLAN feature lets you set protection between ports located on the switch. This

means that a protected port cannot forward traffic to another protected port on the same switch.

The feature does not provide protection between ports located on different switches.

The diagram in this section shows a switch with four ports configured to handle the traffic for two

VLANs. Port 1/0/2 handles traf

fic for both VLANs, while port 1/0/1 is a member of VLAN 2 only,

and ports 1/0/3 and 1/0/4 are members of VLAN 3 only. The script following the diagram shows

the commands you would use to configure the switch as shown in the diagram.

Layer 3 switch

Port 1/0/2 VLAN

Router Port 1/3/1

192.150.3.1

Port 1/0/3 VLAN

Router Port 1/3/2

192.150.4.1

Layer 2

Switch

Layer 2

Switch

VLAN 10 VLAN 20

Port 1/0/1

Figure 1. Switch with 4 ports configured for traffic from 2 VLANs

The following examples show how to create VLANs, assign ports to the VLANs, and assign a

VLAN as the default VLAN to a port.

Create Two VLANs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create Two VLANS

Use the following commands to create two VLANs and to assign the VLAN IDs while leaving

the names blank.

(Netgear Switch) #vlan database

(Netgear Switch) (Vlan)#vlan 2

(Netgear Switch) (Vlan)#vlan 3

(Netgear Switch) (Vlan)#exit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 17

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100