Netgear Switch M4100 User Manual download pdf (Page 402)

100

101

402 | Chapter 24. Double VLANs and Private VLAN Groups

ProSafe M4100 and M7100 Managed Switches

b. Scroll down and select the Interface 1/0/48 check box. Now 1/0/48 appears in the

Interface field at the top.

c. In the Admin Mode field, select Enable.

d. Click Apply to save the settings.

Private VLAN Groups

The private VLAN group allows you to create groups of users within a VLAN that cannot

communicate with members in different groups but only within the same group. There are two

modes for the private group. The mode can be either isolated or community. When in isolated

mode, the member port in the group cannot forward its egress traffic to any other members in

the same group. the default mode is community, in which each member port can forward

traffic to other members in the same group, but not to members in other groups. The following

examples shows how to create a private group.

The following example creates two groups. Group 1 is in community mode, and Group 2 is in

isolated mode.

Internet

Port 1/0/13

Layer 2 Switch

Port 1/0/17Port 1/0/6

Group 1 Group 2

Port 1/0/7 Port 1/0/16

Figure 43. Private VLAN groups in community mode and isolated mode

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 402

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100