Netgear Switch M4100 User Manual download pdf (Page 50)

100

101

50 | Chapter 2. VLANs

ProSafe M4100 and M7100 Managed Switches

d. Click Apply to save the settings.

2. Configure ports 1/0/2-1/0/5 to host port mode.

a. Select Security > T

raffic Control > Private VLAN > Private VLAN Port Mode

Configuration.

A screen similar to the following displays.

b. Under Private VLAN Port Mode Configuration, select the 1/0/2 to 1/0/5 interface

check box.

c. In the Port VLAN Mode field, select Host from the pull-down menu.

d. Click Apply to save the settings.

Configure Private-VLAN Host Ports

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure Private-VLAN Host Ports

Use the following commands to associate isolated ports 1/0/2-1/0/3 to a private-VLAN

(primary=100, secondary=101). Community ports 1/0/4-1/0/5 to a private-VLAN (primary=

100, secondary=102).

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/2-1/0/3

(Netgear Switch) (Interface 1/0/2-1/0/3)#switchport private-vlan host-association 100 101

(Netgear Switch) (Interface 1/0/2-1/0/3)#exit

(Netgear Switch) (Config)#interface 1/0/4-1/0/5

(Netgear Switch) (Interface 1/0/4-1/0/5)#switchport private-vlan host-association 100 102

(Netgear Switch) (Interface 1/0/4-1/0/5)#end

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 50

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100