Netgear Switch M4100 User Manual download pdf (Page 273)

100

101

Chapter 15. Security Management | 273

ProSafe M4100 and M7100 Managed Switches

CLI: Create a Static Address

(Netgear Switch) (Interface 1/0/1)#port-security mac-address 00:13:00:01:02:03

Web Interface: Create a Static Address

1. Select Security > Traffic Control > Port Security > Static MAC address.

A screen similar to the following displays.

2. Under Port List, in the Interface list, select 1/0/1.

3. In the Static MAC

Address section of the screen, enter the following information:

• In the Static MAC

Address field, enter 00:13:00:01:02:03.

• In the Vlan ID list, select 3.

4. Click Add.

Protected Ports

This section describes how to set up protected ports on the switch. Some situations might

require that traffic is prevented from being forwarded between any ports at Layer 2 so that

one user cannot see the traffic of another user on the same switch. Protected ports can:

• Prevent traf

fic from being forwarded between protected ports.

• Allow traf

fic to be forwarded between a protected port and a non-protected port.

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 558 559

Comments to this Manuals

No comments

Netgear Switch M4100 User Manual Page 273

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100