Netgear Switch M4100 User Manual Page 482

  • Download
  • Add to my manuals
  • Print
  • Page
    / 559
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 481
482 | Chapter 28. PIM
ProSafe M4100 and M7100 Managed Switches
4. Configure 1/0/24 as a routing port and assign an IP address to it.
a. Select Routing > IP >
Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/24 check box.
Now 1/0/24 appears in the Interface field at the top.
c. Enter the following information:
In the IP Address field, enter 192.168.4.1.
In the Subnet Mask field, enter 255.255.255.0.
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
5. Enable RIP on interface 1/0/21.
a. Select Routing > RIP >
Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/21.
c. For RIP
Admin Mode, select the Enable radio button.
d. Click Apply.
6. Enable RIP on interface 1/0/22.
a. Select Routing > RIP >
Advanced > Interface Configuration.
Page view 481
1 2 ... 477 478 479 480 481 482 483 484 485 486 487 ... 558 559

Comments to this Manuals

No comments