Netgear 7300 Series User Manual download pdf (Page 286)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

13-4 FSM7326P Power Over Ethernet Commands

202-10009-01_060204

The following fields are displayed for each port. If a port does not have link, or is not enabled for

PoE, the following fields display a value of "N/A".

Class

The Class field reports the class of the powered device according to IEEE802.3af definition.

Output

The Output field reports the power supplied to the powered device (in watts).

Limit

The LIMIT field is the preset limit defined by the "config poe port limit" command. This value is

stated in watts.

Status

The Status field reports the state of power supplied to the associated port. Possible values are:

• Disabled — the POE function is disabled on this port

• Searching — the port is detecting POE device

• Delivering Power — the port is providing power to POE device

• Fault — the POE device is not IEEE compliance, no power is provided

• Test — the port is in testing state

• Other Fault — the port has experience problems other than compliance issue

When a port begins to deliver power, there will be a trap indicating so. When a port stops

delivering power, there will be a trap indicating so.

Table 13-1. Class of the Powered Device

Class Usage Max Power

0 Default

0.44-12.95

1 Optional

0.44-3.84

2 Optional

3.84-6.49

3 Optional

6.49-12.95

4 Not Allowed

Reserved

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 363 364

No comments

Netgear 7300 Series User Manual Page 286