Netgear 7300 Series User Manual Page 129

  • Download
  • Add to my manuals
  • Print
  • Page
    / 364
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 128
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-63
202-10009-01_060204
Active Ports This field lists the ports that are actively participating in the port-
channel (LAG).
show storm-control
This command displays switch configuration information.
Format
show storm-control
Mode Privileged EXEC
Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is
disabled.
802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled.
show vlan
This command displays detailed information, including interface information, for a specific
VLAN.
Format
show vlan <vlanid>, where the ID is a valid VLAN identifica-
tion number
Mode
Privileged EXEC and User EXEC
VLAN ID There is a VLAN Identifier (VID) associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
VLAN Name A string associated with this VLAN as a convenience. It can be
up to 16 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
VLAN Type Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or Dynamic
(one that is created by GVRP registration).
slot/port Indicates by slot id and port number which port is controlled by
the fields on this line. It is possible to set the parameters for all
ports by using the selectors on the top line.
Current Determines the degree of participation of this port in this VLAN.
The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Page view 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 363 364

Comments to this Manuals

No comments