Netgear 7300 Series User Manual Page 200

  • Download
  • Add to my manuals
  • Print
  • Page
    / 364
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 199
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-18 Routing Commands
202-10009-01_060204
no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format
no distribute-list <1-199> out {rip | /jointfilesconvert/1302240/bgp | static |
connected}
Mode Router OSPF Config
distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Default 0
Format
distribute-list <1-199> out {ospf | /jointfilesconvert/1302240/bgp | static |
connected}
Mode Router RIP Config
no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format
no distribute-list <1-199> out {ospf | /jointfilesconvert/1302240/bgp | static |
connected}
Mode Router RIP Config
no default-information originate
This command is used to control the advertisement of default routes.
Format
no default-information originate
Mode Router RIP Config
encapsulation
This command configures the link layer encapsulation type for the packet. Acceptable values for
<encapstype> are Ethernet and SNAP. The default is Ethernet.
Format
encapsulation {ethernet | snap}
Mode Interface Config
Page view 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 363 364

Comments to this Manuals

No comments