Netgear 7300 Series User Manual download pdf (Page 247)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

CLI Commands: Differentiated Services 10-5

202-10009-01_060204

This command may be issued at any time; if the class is currently referenced by one or more

policies or by any other class, this deletion attempt shall fail.

Format

no class-map <classname>

Mode Global Config

class-map rename

This command changes the name of a DiffServ class. The <classname> is the name of an existing

DiffServ class. The

<newclassname> parameter is a case-sensitive alphanumeric string from 1 to

31 characters uniquely identifying the class.

Note: The class name ‘default’ is reserved and must not be used here.

Default None

Format

class-map rename <classname> <newclassname>

Mode Global Config

match any

This command adds to the specified class definition a match condition whereby all packets are

considered to belong to the class. The optional [

not] parameter has the effect of negating this match

condition for the class (i.e., none of the packets are considered to belong to the class).

Default

None

Format match [not] any

Mode Class-Map Config

match class-map

This command adds to the specified class definition the set of match conditions defined for another

class. The <

refclassname> is the name of an existing DiffServ class whose match conditions are

being referenced by the specified class definition.

Note: There is no [not] option for this match command.

Default

None

Format match class-map <refclassname>

Mode Class-Map Config

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 363 364

No comments

Netgear 7300 Series User Manual Page 247