Netgear 7300 Series User Manual download pdf (Page 245)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

CLI Commands: Differentiated Services 10-3

202-10009-01_060204

diffserv

This command sets the DiffServ operational mode to active. While disabled, the DiffServ

configuration is retained and can be changed, but it is not activated. When enabled, Diffserv

services are activated.

Format

diffserv

Mode Global Config

no diffserv

This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ

configuration is retained and can be changed, but it is not activated. When enabled, Diffserv

services are activated.

Format

no diffserv

Mode Global Config

Class Commands

The 'class' command set is used in DiffServ to define:

Traffic Classification Specify Behavior Aggregate (BA), based on DSCP, and Multi-

Field (MF) classes of traffic (name, match criteria)

Service Levels Specify the BA forwarding classes / service levels. Conceptually,

DiffServ is a two-level hierarchy of classes: 1. Service/PHB, 2.

Traffic Class

This set of commands consists of class creation/deletion and matching, with the class match

commands specifying layer 3, layer 2, and general match criteria. The class match criteria are also

known as class rules, with a class definition consisting of one or more rules to identify the traffic

belonging to the class. Note that once a class match criterion is created for a class, it cannot be

changed or deleted - the entire class must be deleted and re-created.

The CLI command root is

class-map.

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 363 364

No comments

Netgear 7300 Series User Manual Page 245