Netgear 7300 Series User Manual download pdf (Page 37)

Web-Based Management Interface 4-1

202-10009-01_060204

Chapter 4

Web-Based Management Interface

Your NETGEAR 7300 Series Layer 3 Managed Switch provides a built-in browser interface that

lets you configure and manage it remotely using a standard Web browser such as Microsoft

Internet Explorer 5.0 or later or Netscape Navigator 6.0 or later.

This interface also allows for system monitoring and management of the switch. The ‘help’ page

covers many of the basic functions and features of the switch and it’s web interface.

When you configure the switch for the first time from the console, you can assign an IP address

and subnet mask to the switch. Thereafter, you can access the switch’s Web interface directly using

your Web browser by entering the switch’s IP address into the address bar. In this way, you can use

your Web browser to manage the switch from a central location, just as if you were directly

connected to the switch’s console port. Figure 4-1 shows this management method.

Figure 4-1: Web Management Method

Web Based Management Overview

The menu options available are: System Management, Switch, Routing, Traffic Management, and

Smart Wizard. There is a help menu in the top of right side of screen; you can click the ‘help’ or

the question mark to read the help menu.

The help menu contains:

• Web-Based Management Introduction to the Web management features.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 363 364

No comments

Netgear 7300 Series User Manual Page 37