Netgear 7300 Series User Manual download pdf (Page 259)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

CLI Commands: Differentiated Services 10-17

202-10009-01_060204

Format no service-policy {in | out} <policymapname>

Mode Global Config (for all system interfaces)

Mode Interface Config (for a specific interface)

Show Commands

The 'show' command set is used in DiffServ to display configuration and status information for:

• Classes

• Policies

•Services

This information can be displayed in either summary or detailed formats. The status information is

only shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.

There is also a 'show' command for general DiffServ information that is available at any time.

show class-map

This command displays all configuration information for the specified class. The <classname> is

the name of an existing DiffServ class.

Format

show class-map [<classname>]

Mode Privileged EXEC and User EXEC

If the Class Name is specified the following fields are displayed:

Class Name The name of this class.

Class Type The class type (all, any, or acl) indicating how the match criteria

are evaluated for this class. A class type of all means every match

criterion defined for the class is evaluated simultaneously they

must all be true to indicate a class match. For a type of any each

match criterion is evaluated sequentially and only one need be

true to indicate a class match. Class type acl rules are evaluated in

a hybrid manner, with those derived from each ACL Rule

grouped and evaluated simultaneously, while each such grouping

is evaluated sequentially.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 363 364

No comments

Netgear 7300 Series User Manual Page 259