Netgear 7300 Series User Manual download pdf (Page 146)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

8-80 Switching Commands

202-10009-01_060204

Designated Root Identifier of the Regional Root for this multiple spanning tree

instance.

Root Path Cost Path Cost to the Designated Root for this multiple spanning tree

instance

Root Port Identifier Port to access the Designated Root for this multiple spanning tree

instance

Associated FIDs List of forwarding database identifiers associated with this

instance.

Associated VLANs List of VLAN IDs associated with this instance.

show spanning-tree mst port detailed

This command displays the detailed settings and parameters for a specific switch port within a

particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to

the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.

Format show spanning-tree mst port detailed <mstid> <slot/port>

Mode Privileged EXEC and User EXEC

MST Instance ID

Port Identifier

Port Priority

Port Forwarding State Current spanning tree state of this port

Port Role

Port Path Cost Configured value of the Internal Port Path Cost parameter

Designated Root The Identifier of the designated root for this port.

Designated Port Cost Path Cost offered to the LAN by the Designated Port

Designated Bridge

Bridge Identifier of the bridge with the Designated Port.

Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to

the

LAN

If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the

settings and parameters for a specific switch port within the common and internal spanning tree.

The <slot/port> is the desired switch port. In this case, the followig are displayed.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 363 364

No comments

Netgear 7300 Series User Manual Page 146