Netgear 7300 Series User Manual download pdf (Page 153)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Switching Commands 8-87

202-10009-01_060204

no spanning-tree max-age

This command sets the Bridge Max Age parameter for the common and internal spanning tree to

the default value, i.e. 20.

Format no spanning-tree max-age

Mode Global Config

spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree

instance or in the common and internal spanning tree. If the <mstid> parameter corresponds to an

existing multiple spanning tree instance, then the configurations are done for that multiple

spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the <mstid>,

then the configurations are performed for the common and internal spanning tree instance.

If the ‘cost’ token is specified, this command sets the path cost for this port within a multiple

spanning tree instance or the common and internal spanning tree instance, depending on the

<mstid> parameter. The pathcost can be specified as a number in the range of 1 to 200000000 or

auto. If "auto" is specified, the pathcost value will be set based on Link Speed.

If the ‘port-priority’ token is specified, this command sets the priority for this port within a specific

multiple spanning tree instance or the common and internal spanning tree instance, depending on

the <mstid> parameter. The port-priority value is a number in the range of 0 to 240 in increments

of 16.

Default cost: auto

port-priorty 128

Format spanning-tree mst <mstid> {cost {<1-200000000> | auto} | port-

priority <0-240>}

Mode Interface Config

no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree

instance or in the common and internal spanning tree to the respective default values. If the

<mstid> parameter corresponds to an existing multiple spanning tree instance, then the

configurations are done for that multiple spanning tree instance. If however 0 (defined as the

default CIST ID) is passed as the <mstid>, then the configurations are performed for the common

and internal spanning tree instance.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 363 364

No comments

Netgear 7300 Series User Manual Page 153