Netgear 7300 Series User Manual download pdf (Page 227)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Routing Commands 9-45

202-10009-01_060204

Neighbor Events The number of times this neighbor relationship has changed state,

or an error has occurred.

External LSA Count The number of external (LS type 5) link-state advertisements in

the link-state database.

LSAs Received

The number of LSAs received.

Originate New LSAs The number of LSAs originated.

show ip ospf neighbor

This command displays the OSPF neighbor table list. When a particular neighbor ID is specified,

detailed information about a neighbor is given. The information below will only be displayed if

OSPF is enabled and the interface has a neighbor. The IP address is the IP address of the neighbor.

Format

show ip ospf neighbor <ipaddr> <slot/port>

Mode Privileged EXEC and User EXEC

Interface Is the slot/port identifying the internal interface number of the

OSPF neighbor.

Router Id Is a 4-digit dotted-decimal number identifying neighbor router.

Options An integer value that indicates the optional OSPF capabilities

supported by the neighbor. The neighbor's optional OSPF capa-

bilities are also listed in its Hello packets. This enables received

Hello Packets to be rejected (i.e., neighbor relationships will not

even start to form) if there is a mismatch in certain crucial OSPF

capabilities.

Router Priority Displays the OSPF priority for the specified interface. The prior-

ity of an interface is a priority integer from 0 to 255. A value of '0'

indicates that the router is not eligible to become the designated

router on this network.

State The types are:

Down- initial state of the neighbor conversation - no recent infor-

mation has been received from the neighbor.

Attempt - no recent information has been received from the

neighbor but a more concerted effort should be made to contact

the neighbor.

Init - an Hello packet has recently been seen from the neighbor,

but bi-directional communication has not yet been established.

2 way - communication between the two routers is bi-directional.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 363 364

No comments

Netgear 7300 Series User Manual Page 227