Netgear 7300 Series User Manual download pdf (Page 48)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

5-2 Command Line Interface Structure

202-10009-01_060204

Parameters

Parameters are order dependent.

The text in bold italics should be replaced with a name or number. To use spaces as part of a name

parameter, enclose it in double quotes like this: "System Name with Spaces".

Parameters may be mandatory values, optional values, choices, or a combination.

– <parameter>. The <> angle brackets indicate that a mandatory parameter must be entered

in place of the brackets and text inside them.

– [parameter]. The [] square brackets indicate that an optional parameter may be entered in

place of the brackets and text inside them.

– choice1 | choice2. The | indicates that only one of the parameters should be entered.

– The {} curly braces indicate that a parameter must be chosen from the list of choices.

Values

ipaddr This parameter is a valid IP address, made up of four decimal

bytes ranging from 0 to 255. The default for all IP parameters

consists of zeros (that is, 0.0.0.1). The interface IP address of

0.0.0.0 is invalid. In some cases, the IP address can also be

entered as a 32-bit number.

macaddr The MAC address format is six hexadecimal numbers separated

by colons, for example 00:06:29:32:81:40.

areaid Area IDs may be entered in dotted-decimal notation (for example,

0.0.0.1). An area ID of 0.0.0.0 is reserved for the backbone. Area

IDs have the same form as IP addresses, but are distinct from IP

addresses. The IP network number of the sub-netted network may

be used for the area ID.

routerid The value of <router id> must be entered in 4-digit dotted-deci-

mal notation (for example, 0.0.0.1). A router ID of 0.0.0.0 is

invalid.

slot/port This parameter denotes a valid slot number and a valid port num-

ber. For example, 0/1 represents slot number 0 and port number 1.

The <slot/port> field is composed of a valid slot number and a

valid port number separated by a forward slash (/).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 363 364

No comments

Netgear 7300 Series User Manual Page 48