Netgear 7300 Series User Manual download pdf (Page 158)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

8-92 Switching Commands

202-10009-01_060204

Access Mode Shows whether the operator is able to change parameters on the

switch (Read/Write) or is only able to view them (Read Only). As

a factory default, admin has Read/Write access and guest has

Read Only access. There can only be one Read/Write user and up

to five Read Only users.

SNMPv3 AccessMode This field displays the SNMPv3 Access Mode. If the value is set

ReadWrite, the SNMPv3 user will be able to set and retrieve

parameters on the system. If the value is set to

ReadOnly, the

SNMPv3 user will only be able to retrieve parameter information.

The SNMPv3 access mode may be different than the CLI and

Web access mode.

SNMPv3 Authentication This field displays the authentication protocol to be used for the

specified login user.

SNMPv3 Encryption This field displays the encryption protocol to be used for the

specified login user.

users name

This command adds a new user (account) if space permits. The account <username> can be up to

eight characters in length. The name may be comprised of alphanumeric characters as well as the

dash (‘-’) and underscore (‘_’). The <username> is not case-sensitive.

Six user names can be defined.

Format

users name <username>

Mode

Global Config

no users name

This command removes an operator.

Format

no users name <username>

Mode Global Config

Note: The admin user account cannot be deleted.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 363 364

No comments

Netgear 7300 Series User Manual Page 158