Netgear 7300 Series User Manual download pdf (Page 253)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

CLI Commands: Differentiated Services 10-11

202-10009-01_060204

To specify the match condition as a single keyword notation, the value for <portkey> is one of the

supported port name keywords (listed below).

The currently supported <

portkey> values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp,

www

. Each of these translates into its equivalent port number, which is used as both the start and

end of a port range.

To specify the match condition as a numeric value, one layer 4 port number is required. The port

number is an integer from 0 to 65535.

To specify the match condition as a range, two layer 4 port numbers are required and together they

specify a contiguous port range. Each port number is an integer from 0 to 65535, but with the

added requirement that the second number be equal to or greater than the first. The optional [

not]

parameter has the effect of negating this match condition for the class (i.e., match all source layer 4

ports except for those within the range specified here).

The optional [

not] parameter has the effect of negating this match condition for the class (i.e.,

match all source layer 4 port numbers except for the one specified here).

Default

None

Format match [not] srcl4port {<portkey> | <0-65535> [<0-

65535>]}

Mode Class-Map Config

match vlan

This command adds to the specified class definition a match condition based on the value of the

layer 2 VLAN Identifier field of a packet. The VLAN ID is an integer from 1 to 4094. The

optional [

not] parameter has the effect of negating this match condition for the class (i.e., match all

VLAN Identifier values except for what is specified here).

Default

None

Format match [not] vlan <1-4094>

Mode Class-Map Config

Policy Commands

The 'policy' command set is used in DiffServ to define:

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 363 364

No comments

Netgear 7300 Series User Manual Page 253