Netgear DGN1000v3 User Manual download pdf (Page 96)

Advanced Settings

N150 Wireless ADSL2+ Modem Router DGN1000v3

 To restrict access based on MAC addresses:

1. Select ADVANCED > Advanced Setup > Wireless Settings.

2. Click the Set Up Access List button.

3. Click the Add button.

4. In the Device Name field, type a name for the wireless device.

5. In the MAC Address field, type the MAC address of the wireless device.

Tip: You can also copy and paste the MAC addresses from the Attached

Devices screen into the MAC Address field on this screen.

To do this, use

each wireless computer to join the wireless network. The computer then

displays on the Attached Devices screen.

6. Click the Add button.

The wireless device is added to the table on the Wireless Card Access List screen.

7. (Optional) Repeat Step 4 through Step 6 for additional wireless devices.

8. Select the Turn Access Control

On check box.

9. Click the Apply button.

Now only wireless devices that are in the table on the Wireless Card Access List screen

can access the modem router.

 To change a wireless device on the access list:

1. Select ADVANCED > Advanced Setup > W

ireless Settings.

The Advanced Wireless Settings screen displays.

2. In the table, select the radio button next to the wireless device for which you want to make a

change.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 96