Netgear DGN1000v3 User Manual download pdf (Page 34)

NETGEAR genie Basic Settings

N150 Wireless ADSL2+ Modem Router DGN1000v3

The passphrase is a text string from 8 to 63 ASCII characters or exactly 64 hexadecimal

digits. A hexadecimal digit is one of the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,

B, C, D, E, and F (uppercase or lowercase).

Wireless clients need to use the passphrase to access the wireless network through the

modem router.

4. Click the Apply button.

Security Options: WPA/WPA2 Enterprise

This security option is not for home use but is typically used in a business or enterprise.

WPA/WPA2 Enterprise does not use a passphrase but supports 802.1x authentication, which

requires an internal or external RADIUS server. A Remote Authentication Dial In User

Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA)

management to grant (or deny) computers access to your wireless network.

WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only, WPA2 [AES] for WPA2

clients only

, and WPA [TKIP] + WP

A2 [AES], which is a combination of TKIP and AES

encryption, for both WPA and WPA2 clients. WPA clients are supported at speeds of up to

54 Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.

WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication

methods: EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,

and EAP-SIM.

 To configure WPA/WPA2 Enterprise security:

1. Select BASIC > Wireless.

The Wireless Settings screen displays.

2. In the Security Options section, select the WPA/WPA2 Enterprise

radio button.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 34