WN1000RP WiFi Booster for Mobile Installation Guide
10Connect with NETGEAR genie Smart Setup1. Use a WiFi network utility on a computer or mobile device to find and connect to the NETGEAR_EXT (SSID) WiF
112. Open a web browser window from the same computer or mobile device. The browser takes you directly to the NETGEAR genie® Smart Setup.Note: If you
124. Type the network passphrase (also called password or security key) in the PassPhrase field and click the Continue button.5. Type the name (SSID)
13The WiFi booster settings are applied and the following screen displays:6. Use a WiFi network manager on the computer or mobile device to connect to
147. Select the check box and click the Continue button.
158. Unplug the WiFi booster and move it to a new location closer to the area with a poor WiFi signal. The location you choose must be within the rang
16Access WiFi Booster SettingsAfter installation, you can log in to the WiFi booster to view or change the WiFi booster’s settings. To log in to the
17Frequently Asked QuestionsYou can find more information about your product in the user manual, which is available at http://support.netgear.com.The
18What are the user name and password to log in to the WiFi booster?The user name is admin and the default password is password. Both are case-sensiti
193. Make sure that the Link Rate LED remains lit.4. Log in to your router and check the attached devices on the Attached Devices screen. 5. Add any M
2ContentsGetting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Meet Your WiFi Booster. . . . . . . . . .
NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134 USANovember 2013SupportThank you for selecting NETGEAR products. After installing your device,
3Getting StartedThe NETGEAR WiFi Booster for Mobile increases the distance of a WiFi network by boosting the existing WiFi signal and enhancing the ov
4Meet Your WiFi BoosterBefore you install your WiFi booster, familiarize yourself with its LEDs and buttons.Front Panel and Side PanelBottom PanelOn/O
5LED DescriptionsUse the LEDs during installation to find the best location for the WiFi booster or to monitor the WiFi booster performance.Link Rate
6Button DescriptionsThe side panel has the following features:• On/Off button. Turns the device on and off.• WPS button. Press the WPS button to wirel
7Install the WiFi BoosterPlace the WiFi booster, apply power, and connect it to your WiFi network.Place the WiFi Booster1. Place your WiFi booster in
8Connect with WPSWi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. The WPS button is a phy
93. Find the new WiFi booster network name.The WiFi booster’s network name (SSID) changes to your existing WiFi network name, with _EXT at the end of
Comments to this Manuals