Netgear DGN1000v3 User Manual download pdf (Page 116)

Advanced Settings

116

N150 Wireless ADSL2+ Modem Router DGN1000v3

• For a range of IP addresses on the Internet:

a. Select IP Address Range radio button.

b. In the From fields, enter the start IP address of the range from which access is

allowed.

c. In the

To fields, enter the end IP address of the range from which access is

allowed.

• For all IP addresses on the Internet, keep the Everyone

radio button selected.

This is the default setting.

4. Specify the port number for accessing the web management interface.

Normal web browser access uses the standard HTTP service port 80. For greater

security, enter a custom port number for the remote web management interface. Choose

a number from 1024 to 65535, but do not use the number of any common service port.

The default is 8080, which is a common alternate for HTTP.

5. Click the Apply

button.

Your changes take effect.

When you access your modem router from the Internet, type your modem router’s WAN IP

address in your browser’s address or location field followed by a colon (:) and the custom port

number

. For example, if your external address is 203.0.113.123 and you use port number

8080, enter http://203.0.113.123:8080 in your browser.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,

access the network and connect to other devices as needed. UPnP devices can

automatically discover the services from other registered UPnP devices on the network.

If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time

communications such as instant messaging or remote assistance, NETGEAR recommends

that you enable UPnP.

 To turn on Universal Plug and Play:

1. Select ADVANCED > Advanced Setup > UPnP.

2. Select the Turn UPnP On check box.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 116