Netgear DGN1000v3 User Manual download pdf (Page 37)

NETGEAR genie Basic Settings

N150 Wireless ADSL2+ Modem Router DGN1000v3

Set Up a Guest Network

Adding a guest network allows visitors at your home to use the Internet without using your

wireless security key. You can set up to three guest networks, all of which can be active at a

same time. However, if all three guest networks are active, only one is displayed on the

Router Status screen (see View Router Status on page 76). By default, none of the guest

networks are enabled.

 To set up a guest network:

1. Select BASIC > Guest Network.

2. In the Network Profiles table, select the radio button to the left of the profile that you want to

set up.

3. Select any of the following wireless settings:

• Enable Guest Network. When this check box is selected, the guest network is

enabled, and guests can connect to your network using the SSID of this profile.

• Enable SSID Broadcast. If this check box is selected, the wireless access point

broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt

the correct SSID for connections to this access point.

• Allow guest to access My Local Network. If this check box is selected, anyone who

connects to this SSID has access to your local network, not just Internet access.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 37