Netgear DGN1000v3 User Manual download pdf (Page 85)

Administration

N150 Wireless ADSL2+ Modem Router DGN1000v3

Restore Configuration Settings

 To restore configuration settings that you backed up:

1. Select ADVANCED >

Administration > Backup Settings.

The Backup Settings screen displays.

2. Click the Browse button.

3. Locate and select the .cfg file.

4. Click the Restore button.

The file is uploaded to the modem router, and the modem router reboots.

WARNING:

Do not interrupt the reboot process.

Erase the Current Configuration Settings

You can use the Erase button erase the configuration and restore the factory default settings.

You might want to erase the configuration if you move the modem router to a different

network.

You can also use the Restore Factory Settings button on the right side panel of the modem

router to erase the configuration and restore the factory settings. For more information, see

Side Panel with Restore Factory Settings Button on page 12 and Factory Settings on

page 143.

 To erase the configuration settings:

1. Select ADVANCED >

Administration > Backup Settings.

The Backup Settings screen displays.

2. Click the Erase button.

The factory default settings are restored. The user name is admin, the password is

password, and the LAN IP address is 192.168.0.1. DHCP is enabled.

Change the Password

This feature let you change the default password that is used to log in to the modem router

with the user name admin.

Changing the password is not the same as changing the password for wireless access. The

label on the modem router shows your unique wireless network name (SSID) and password

for wireless access (for more information, see Bottom Panel on page 13).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 85