Netgear DGN1000v3 User Manual download pdf (Page 91)

Advanced Settings

N150 Wireless ADSL2+ Modem Router DGN1000v3

Advanced Wireless Settings

You can use this screen to turn the wireless radio on and off, to configure advanced wireless

settings, to specify WPS settings, to use AP mode, and to set up a wireless access list.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the modem

router. You can turn the wireless radio on or off on the Advanced Wireless Settings screen or

by using the WiFi On/Off button on the modem router front panel. When the wireless radio is

off, you can still use an Ethernet cable for a LAN connection to the modem router.

 To turn the radio on or off and change advanced settings for your wireless network:

1. Select ADVANCED > Advanced Setup > W

ireless Settings.

By default, the Enable Wireless Router Radio check box is selected.

2. (Optional) Clear the Enable Wireless Router Radio check box.

Clearing this check box turns off the WiFi feature of the modem router. When the wireless

radio is disabled, you can still use the modem router by connecting computers to the

modem router with an Ethernet cable. By default, the wireless radio is enabled.

3. (Optional) Clear the Enable 20/40 MHz Coexistence

check box.

By default, 20/40 MHz coexistence is enabled to prevent interference between wireless

network in your environment at the expense of the wireless speed. If there are no other

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 147 148

No comments

Netgear DGN1000v3 User Manual Page 91