Netgear GS728TPP User Manual Page 214

  • Download
  • Add to my manuals
  • Print
  • Page
    / 277
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 213
214
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Overruns. The total number of frames discarded as this port was overloaded with
incoming packets, and was not able to keep up with the inflow.
802.3x Pause Frames Received. A count of MAC control frames received on this
interface with an operation code indicating the pause operation. This counter does not
increment when the interface is operating in half-duplex mode.
Total Packets Transmitted (Octets). The total number of octets of data (including
those in bad packets) transmitted on the network (excluding framing bits but including
FCS octets). This object can be used as a reasonable estimate of Ethernet utilization.
Total Packets Transmitted Successfully. The number of frames that have been
transmitted by this port to its segment.
Unicast Packets Transmitted. The total number of packets that higher-level
protocols requested be transmitted to a subnetwork-unicast address, including those
that were discarded or not sent.
Multicast Packets Transmitted. The total number of packets that higher-level
protocols requested be transmitted to a multicast address, including those that were
discarded or not sent.
Broadcast Packets Transmitted. The total number of packets that higher-level
protocols requested be transmitted to the broadcast address, including those that
were discarded or not sent.
Total Transmit Errors. The sum of single, multiple, and excessive collisions.
Tx FCS Errors. The total number of packets transmitted that had a length (excluding
framing bits, but including FCS octets) of from 64 through 1518 octets, inclusive, but
had a bad FCS with an integral number of octets.
Tx Oversized. The total number of frames that exceeded the maximum permitted
frame size. This counter has a maximum increment rate of 815 counts per second at
10 Mb/s.
Total Transmit Packets Discarded. The sum of single collision frames discarded,
multiple collision frames discarded, and excessive frames discarded.
Single Collision Frames.The number of successfully transmitted frames on a
particular interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames. The number of successfully transmitted frames on a
particular interface for which transmission is inhibited by more than one collision.
Excessive Collision Frames. The number of frames for which transmission on a
particular interface fails due to excessive collisions.
802.3x Pause Frames Transmitted. The number of MAC control frames transmitted
on this interface with an operation code indicating the pause operation. This counter
does not increment when the interface is operating in half-duplex mode.
EAPOL Frames Received. The number of valid EAPOL frames of any type received
by this authenticator.
EAPOL Frames Transmitted. The number of EAPOL frames of any type transmitted
by this authenticator.
Page view 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 276 277

Comments to this Manuals

No comments