Netgear GS728TPP User Manual download pdf (Page 194)

194

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

 To configure MAC ACL interface bindings:

1. Select Security  ACL > Basic  MAC Binding Configuration.

The following screen displays:

1. From the ACL ID list, select an existing MAC ACL.

The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are

applied to traf

fic entering the port.

2. Specify an optional sequence number to indicate the order of this access list relative to other

access lists already assigned to this interface and direction.

A low number indicates high precedence order. If a sequence number is already in use

for this interface and direction, the specified access list replaces the currently attached

access list using that sequence number

. If you do not specify the sequence number, a

sequence number that is one greater than the highest sequence number currently in use

for this interface and direction is used. The valid range is 1–4294967295.

3. Click the appropriate orange bar to expose the available ports or LAGs.

• T

o add the selected ACL to a port or LAG, click the box directly below the port or LAG

number so that a

√ appears in the box.

• T

o remove the selected ACL from a port or LAG, click the box directly below the port

or LAG number to clear the selection. An

√ in the box indicates that the ACL is

applied to the interface.

4. Click APPL

Y to update the switch with the new settings.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 276 277

No comments

Netgear GS728TPP User Manual Page 194