Netgear GS728TPP User Manual download pdf (Page 248)

248

A. Hardware Specifications and Default

Values

The GS752TP, GS728TP, and GS728TPP switches conform to the TCP/IP, UDP, HTTP,

ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1 p, and IEEE 802.1Q standards.

They also conform to the IEEE802.3i (10BASE-T), IEEE802.3ii (100Base-TX), IEEE802.3ab

(1000Base-T), IEEE802.3z (1000Base-X), IEEE802.3af (DTE Power via MDI), IEEE802.3at

(DTE Power via MDI Enhancements), and IEEE802.3az (EEE) standards.

Feature Value

Interfaces 24 or 48 10/100/1000 Mbps switching ports

GS752TP

. The first eight ports are PoE+ (Power over Ethernet)

providing 30W of DC power, and the remaining ports are PoE providing

15.4W of DC power.

GS728TPGS728TP

. The first eight ports are PoE+ providing 30W of

DC power, and the remaining ports are PoE providing 15.4W of DC

power.

GS728TPP

. All 24 ports are PoE+ providing 30W of DC power. This

model includes an external power supply to support the increased

power requirements.

Four 100/1000M SFP ports (port 25–29 or 49–52) to support optical

module

Flash memory size 32 MB

SDRAM size and type 128 MB DDR2

Feature Value

Switching capacity Non blocking Full Wire Speed on all packet sizes

Forwarding method Store and Forward

Packet forwarding rate 10M

: 14,880 pps

100M

: 148,810 pps

: 1,488,000 pps

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 276 277

No comments

Netgear GS728TPP User Manual Page 248