Netgear GS728TPP User Manual download pdf (Page 230)

230

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

 To upload a file from the switch to the TFTP server:

1. Select Maintenance  Upload  TFTP File Upload.

The following screen displays:

2. Use the File Type list to select the type of file you want to upload.

For more information, see Upload File Types .

• Archive. Retrieve the active software image file.

• Text Configuration. Retrieve the stored text configuration file.

• Buffered Log. Retrieve the syslog file.

The factory default is Archive.

3. From the Server Address Type field, select the format to use for the address you type in the

Server Address field:

• IPv4. The TFTP server address is an IP address in dotted-decimal format.

• DNS. The TFTP server address is a host name.

4. In the Server Address field, specify the IP address or host name of the TFTP server.

The address you type must be in the format indicated by the TFTP server address type.

5. In the Transfer File Path field, specify the path on the TFTP server where you want to put

the file.

You can enter up to 32 characters. Include the backslash at the end of the path. A path

name with a space is not accepted. Leave this field blank to save the file to the root TFTP

directory.

6. In the Transfer File Name field, specify a destination file name for the file to upload.

7. You can enter up to 32 characters. The transfer fails if you do not specify a file name. For a

code transfer, use the

.ros file extension.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 276 277

No comments

Netgear GS728TPP User Manual Page 230