Netgear GS728TPP User Manual download pdf (Page 193)

193

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

addresses with aa:bb:xx:xx:xx:xx result in a match (where x is any hexadecimal

number). A MAC mask of 00:00:00:00:00:00 matches a single MAC address.

• EtherType Key. Requires a packet’s EtherType to match the EtherType you select.

Select the EtherType value from the drop-down list. If you select User Value, you can

enter a custom EtherType value.

• EtherType User Value. This field is configurable if you select User Value from the

EtherType drop-down list. The value you enter specifies a customized EtherType to

compare against an Ethernet frame. The valid range is 0x0600–0xFFFF.

• Source MAC. Requires a packet’s source port MAC address to match the address

listed here. Enter a MAC address in this field. The valid format is xx:xx:xx:xx:xx:xx.

• Source MAC Mask. If desired, enter the MAC mask for the source MAC address to

match. Use Fs and 0s in the MAC mask, which is in a wildcard format. An F means

that the bit is not checked, and a 0 in a bit position means that the data must equal the

value given for that bit. The valid format is xx:xx:xx:xx:xx:xx. A MAC mask of

00:00:00:00:00:00 matches a single MAC address.

• VLAN. Requires a packet’s VLAN ID to match the ID listed here. Enter the VLAN ID to

apply this criteria. The valid range is 1–4093.

• Logging. Enables or disables logging of management access list (ACL) deny events.

5. Click ADD.

To change a rule, select the check box associated with the rule, change the desired fields, and

click APPLY.

MAC Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the

selected interface. Use the MAC Binding Configuration screen to assign MAC ACL lists to

ACL priorities and interfaces.

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 276 277

No comments

Netgear GS728TPP User Manual Page 193