Netgear GS728TPP User Manual download pdf (Page 37)

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

3. In the DNS Default Name field, enter a default DNS name to include in DNS queries. When

the system is performing a lookup on an unqualified host name, this field is provided as the

domain name. For example, if the default domain name is netgear.com and the host name

to resolve is test, test.netgear.com is used in DNS resolution queries.

4. in the DNS Server field, enter an IP address representing the DNS server to which the

switch sends DNS queries, and click ADD. The server appears in the DNS Server list.

• Use standard IPv4 dot notation (from 1 through 158 characters).

• You can specify up to eight DNS servers.

• DNS server precedence is set according to the creation order.

5. Click APPLY to send the updated configuration to the switch.

Configuration changes take effect immediately.

Host Configuration

Use this screen to manually map host names to IP addresses or to view Dynamic DNS

mappings.

 To add a static entry to the local DNS table:

1. Select System  Management  DNS  Host Configuration.

The following screen displays:

2. Specify the static host name to add.

• Enter up to 158 characters.

• Each label (separated by periods) can be up to 63 characters.

3. Specify the IP address in standard IPv4 dot notation to associate with the hostname.

4. Click ADD. The entry displays in the list.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 276 277

No comments

Netgear GS728TPP User Manual Page 37