Netgear GS728TPP User Manual download pdf (Page 100)

100

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

The following screen displays:

2. To add an MST instance, configure the MST values and click Add:

• MST ID. Specify the ID of the MST to create.

The valid range is 1–15.

• Priority. Specify the bridge priority value for the MST

. When switches or bridges are

running STP, each is assigned a priority. After exchanging BPDUs, the switch with the

lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096.

If you specify a priority that is not a multiple of 4096, the priority is automatically set to

the next lowest priority that is a multiple of 4096. For example, if you set the priority to

any value from 0 through 4095, the priority is set to 0. The default priority is

32768.The valid range is 0–61440.

• VLAN ID.

The list contains all VLANs configured on the switch. Select a VLAN to

associate with the MST instance.

3. Click APPL

Y to send the updated configuration to the switch.

Configuration changes take place immediately.

 To modify an MST instance:

1. Select the check box next to the instance to configure and update the values.

You can select multiple check boxes to apply the same setting to all selected MTS

instances.

2. Click APPL

Y to send the updated configuration to the switch.

Configuration changes take place immediately.

To delete an MST instance, select the check box next to the instance and click DELETE.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 276 277

No comments

Netgear GS728TPP User Manual Page 100